Matsakaicin Matsala da Tanderun Sintering (MIM Furnace, Furnace Ƙarfa)
Halaye
1. Graphite rufi allo / karfe allo na zaɓi, dumama kashi 360 digiri kewaye radiation dumama, abin dogara rufi zane.
2. Higher zafin jiki uniformity da thermal yadda ya dace
3. Vacuum partial matsa lamba / Multi-yanki zazzabi kula da aiki.
4. Cikakken kayan aiki mai sarrafa kansa, cikakken aminci da tsarin ƙararrawa mara kyau.
5. Madaidaicin tsarin sarrafawa don cimma daidaiton ingancin sashi da kuma hana gurbatar sassa da wuraren zafi.
6. Tare da shãfe haske degreasing akwatin da injin kwandishan don rage gurbatawa na dumama dakin da naúrar.
7.Hana gurbatawa ga abubuwan da ke cikin tanderun.Ana amfani da akwatin rage girman murabba'in don magance yawan adadin abubuwan da ake gyarawa.
8. Yana da ayyuka na m injin hakar, vacuum sintering, micro-positive matsa lamba sintering da sauransu.
9. Ana amfani da sabon tsarin ƙirar thermal da kayan aiki, ƙarfin juriya yana da ƙarfi, kuma ceton makamashi a bayyane yake.
10.It yana da ayyuka na overtemperature da ƙararrawa overpressure, inji atomatik matsa lamba kariya, atomatikoverpressure taimako kariya, mataki interlock da sauransu, high kayan aiki aminci.
11.Remote aiki, m kuskure ganewar asali da m software haɓaka ayyuka, da dai sauransu.
Daidaitaccen ƙirar ƙirar ƙira da sigogi
| Samfura | PJSJ-gr-30-1600 | PJSJ-gr-60-1600 | PJSJ-gr-100-1600 | PJSJ-gr-200-1600 | PJSJ-gr-450-1600 |
| Yankin zafi mai inganci LWH (mm) | 200*200* 300 | 300*300* 600 | 300*300* 900 | 400*400* 1200 | 500*500* 1800 |
| Nauyin kaya (kg) | 100 | 200 | 400 | 600 | 10000 |
| Ƙarfin zafi (kw) | 65 | 80 | 150 | 200 | 450 |
| Matsakaicin zafin jiki (℃) | 1600 | ||||
| Daidaitaccen sarrafa zafin jiki (℃) | ±1 | ||||
| Daidaita yanayin zafin wuta (℃) | ±3 | ||||
| Degree vacuum (Pa) | 4.0 * E-1 | ||||
| Yawan yin famfo (zuwa pas 5) | ≤10 min | ||||
| Matsakaicin haɓaka (Pa/H) | ≤ 0.5 | ||||
| Adadin kuɗi | 97.5% | ||||
| Hanyar ƙaddamarwa | N2 a cikin mummunan matsa lamba, H2 a cikin yanayi | ||||
| Shigar gas | N2, H2, Ar | ||||
| Hanyar sanyaya | inert gas sanyaya | ||||
| Hanyar karkatarwa | Vacuum sintering, partial matsa lamba sintering, matsi sintering | ||||
| Tsarin wuta | A kwance, ɗaki ɗaya | ||||
| Hanyar buɗe kofar murhu | Nau'in hinge | ||||
| Abubuwan dumama | Abubuwan dumama graphit | ||||
| Zauren dumama | Tsarin tsari na Graphit mai wuyar ji da taushin ji | ||||
| Thermocouple | Nau'in C | ||||
| PLC & abubuwan lantarki | Siemens | ||||
| Mai sarrafa zafin jiki | EUROTHERM | ||||
| Vacuum famfo | Injin famfo da tushen famfo | ||||
| Keɓaɓɓen jeri na zaɓi | |||||
| Matsakaicin zafin jiki | 1300-2800 ℃ | ||||
| Matsakaicin digiri | 6.7 * E-3 Pa | ||||
| Tsarin wuta | Horizontal, tsaye, Single Chamber | ||||
| Hanyar bude kofa | Nau'in hinge, Nau'in ɗagawa, Nau'in lebur | ||||
| Abubuwan dumama | Abubuwan dumama Graphit, Mo abubuwan dumama | ||||
| Zauren dumama | Haɗe da graphit ji, All karfe nuna allo | ||||
| Vacuum famfo | Injin famfo da famfo tushen;Makanikai, Tushen da fanfunan watsawa | ||||
| PLC & abubuwan lantarki | Siemens;Omron;Mitsubishi;Siemens | ||||
| Mai sarrafa zafin jiki | EUROTHERM;S HIMADEN | ||||
